Sovol SV08
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
|
About the SV08 category
Everything related to SV08 |
|
0 | 828 | May 6, 2024 |
|
Sovol Donation Number Three To Voron Design
Sovol donation number three: another $1000 to support Voron Design. We will continue to keep open source as our core and return to the community effort and contribution, as always! https://github.com/Sovol3d/SV08 |
|
1 | 537 | April 3, 2026 |
|
Sv08 usb connection
|
|
4 | 66 | October 16, 2026 |
|
Turning my daughter's drawing into a printable figure on the SV08?
|
|
5 | 49 | October 14, 2026 |
|
Suddenly poor print quality on two SV08's - solved with extruder idler gear
|
|
31 | 4106 | October 11, 2026 |
|
SV08 Eddy current kit firmware- v2.5.0
|
|
3 | 674 | October 6, 2026 |
|
Slanted front idle pulleys
|
|
8 | 185 | September 23, 2026 |
|
Eddy upgrade kit firmware 2.5.0 vs 2.4.9?
|
|
5 | 710 | September 22, 2026 |
|
Teplota pri nástupe tlače (Temperature at the onset of printing)
|
|
2 | 46 | September 19, 2026 |
|
Exhaust Fan output
|
|
3 | 100 | September 19, 2026 |
|
Sovol 08
|
|
3 | 114 | September 18, 2026 |
|
Extruder problem
|
|
3 | 790 | September 18, 2026 |
|
Is this Stringing?
|
|
3 | 111 | September 13, 2026 |
|
Sovol 08 Erro Save variable
|
|
9 | 138 | September 13, 2026 |
|
SV08 with Klipper 0.13.0 strange error with x and y endstop triggered
|
|
3 | 90 | September 12, 2026 |
|
Coprint installation issues
|
|
1 | 75 | September 6, 2026 |
|
SV08 armbian
|
|
2 | 160 | September 6, 2026 |
|
The nuances of bed mesh
|
|
1 | 128 | September 5, 2026 |
|
Input Shaping calibration
|
|
1 | 141 | September 4, 2026 |
|
Identify the problem
|
|
33 | 390 | September 4, 2026 |
|
SV08 Stops Extruding Mid-Print
|
|
21 | 1465 | September 2, 2026 |
|
SV08 Standard Homing problems, Extruder not heating, Hotend banging on bed, etc
|
|
8 | 153 | September 2, 2026 |
|
Sv 08
|
|
14 | 199 | September 2, 2026 |
|
Oozy END_PRINT & runout bugs
|
|
3 | 78 | September 1, 2026 |
|
Reset
|
|
2 | 115 | August 26, 2026 |
|
3D Print comes off the build plate
|
|
6 | 122 | August 21, 2026 |
|
Battery Backup Recommendations
|
|
5 | 161 | August 16, 2026 |
|
Error Log, need help reading them
|
|
7 | 92 | August 16, 2026 |
|
SV08 - overcoming high-temperature Klipper Shutdown problem - my solution
|
|
7 | 1581 | August 15, 2026 |
|
Eddy problem
|
|
5 | 147 | August 14, 2026 |