Jenss / sovol3delger
Ok the power has been restored after 25 hrs so I can get on line…
Big problem is the ft/sd cards I am using are to BIG. So ordered some 8g cards. Now wait.
The card that came with the printer is a story. I printed Benchy and all went well but after loading a couple of other files and printing them it suddenly stopped working. Anytime I tried it showed “SD INIT FAIL” and when checked in linux with fdisk -l it reported no partition table. I hadn’t checked that before but I do remember seeing 3 files listed, manual, benchy, and the bin file. So it got chucked…
check out this link and the instructions about how to flash firmware.
SV06 Mainboard brick after updating Sovol Firmware - #5 by Melthor
about half way down theres and answer from Sovol with a link to a YouTube Video…
Thanks Guys
Jim