Hello, I have the following problem and haven’t found a solution yet. Due to problems I tried to update the firmware of the SV06. Loaded the .bin file from Sovol3d.com and put it on the SD card. Started the SV06 with the SD card and the screen stayed blue. After removing the SD card, the screen …

@sovol3d I have the same issue and I am unable to fix it despite numerous attempts… I received the printer yesterday, could print a benchy, then followed the steps to update the firmware. Only blue screen lights up now. I sent you an email with the details to info@sovol3d.com along with the order n…

Hello, same issue here. Is it possible to do a hard reset?

I don’t know, or if the board can do that. I’m still waiting for a response from support!

i was able to fix the problem for me. I reloaded the firmware from the server and renamed it to 192a.bin Put it on the SD Card and Power on. That was the solution for me.

Hi, Melthor. Could you please check the following things? First, please Check whether the screen cable is firmly plugged in and whether it is damaged. Then, Make sure that the TF card used by the customer to flash the firmware can be read on the computer, and the TF card has been formatted before …

Hello sovol3d, thanks this helped alot, have had the same issue but could solve it with your solution. Thanks alot - keep on going! Kind regards m0dzilla

Yes, I’ve tried everything. Even the screen of the SV01. I can’t flash anything via SD card if it doesn’t recognize an SD card. The board is probably broken, just like the hotend was assembled incorrectly! I even had to exchange the LMU8 because they arrived defective! Nothing moved on the X an…

Hello, do I have to rename the current firmware file of the SV06 (SV06-v192A-1028-1.3) to “firmware.bin” before I insert the TF card into the printer?

Hey Heavycrafter, this was not necessary for me to update. I just used the original name. Important to use a new formatted sd card. With only the SV06-v192A-1028-1.3.bin file on it. Then insert, turn on, wait like 5 sec and its working.

Ich habe das selbe preoblem kann die firmware nicht hochladen!

SV06 Mainboard brick after updating Sovol Firmware

Sovol SV06 Fully Open Source 3D Printer

Melthor November 27, 2022, 6:45pm 5

no .bin file or sd-card work.
Unfortunately no one can help so far. Unfortunately, the board does not even recognize an SD card. Therefore, flashing via SD card is not possible.

SV06 connected to octoprint shows firmware issues

Topic		Replies	Views
Bjoern Firmware Install Sovol SV04 IDEX	45	958	April 20, 2025
SV06 mit SKR E3 Mini V3 Sovol SV06 Fully Open Source 3D Printer german	28	2401	November 26, 2023
SV06 Bad Flash - Probably Needs Bootloader Sovol SV06 Fully Open Source 3D Printer solved , firmware	4	1801	August 1, 2023
Firmware Problem, not starting up Sovol SV04 IDEX firmware	19	938	July 1, 2024
Problem of flashing on brand new Sovol SV06 Sovol SV06 Fully Open Source 3D Printer firmware	0	618	April 19, 2023

SV06 Mainboard brick after updating Sovol Firmware

Related topics