Sooner or later, I’d like to print carbon fiber filaments (PLA-CF, PETG-CF) with my new SV06 Ace Plus.I know that I can’t use the standard brass nozzle and should therefore use a hardened steel nozzle. But what about the extruder? Is the hotend, filament transport, gearing of the SV06 Ace Plus sui…

All you need to do is replace the nozzle.

As Lion already wrote, PLA and PETG are no problem. However, carbon fiber requires a hardened nozzle with a diameter larger than 0.4 mm, if possible. Unfortunately, Sovol only offers a 0.4 mm steel nozzle, which is prone to clogging.

Also, remember to increase the heat of the hotend about 10* when using a hardened nozzle or it will clog.

Nozzles! What a mess. According the PDF Sovol put on Github the Ace nozzle is 23.5mm long. https://github.com/Sovol3d/SV06-ACE/blob/main/PDF/JXHMP3A02-08023-a%20%E5%A4%A7%E6%B5%81%E9%87%8F%E9%BB%84%E9%93%9C%E5%96%B7%E5%98%B4%20translate_.pdf That is the same length as my SV07 except the 2mm of th…

[image] Volcano nozzle experience: mostly successful, but worse cooling? Sovol SV06 ACE Thanks for the info! I’ve already tested it and installed a K1 nozzle for Creality printers. The difference to the Sovol nozzle is only 0.5mm. In my case, the nozzle is from Fysetc, mad…

SV06 Ace Plus suitable for carbon fiber filaments?

Sovol SV06 Plus ACE

Oliver April 10, 2025, 8:49pm 6

Topic		Replies	Views
Another nozzle problem Sovol SV06 Plus	7	941	June 28, 2023
Third party nozzle for SV06 ACE Sovol SV06 ACE	32	2576	October 13, 2025
Upgrades to SV08 (Hardened Hotend, etc.) Sovol SV08	11	4843	December 16, 2024
Proprietary Nozzle? Sovol SV06 Plus	19	4731	July 17, 2023
Volcano nozzle experience: mostly successful, but worse cooling? Sovol SV06 ACE challenging	30	1338	May 13, 2025

SV06 Ace Plus suitable for carbon fiber filaments?

Related topics