SOVOL SV08 3D Printer Bed warping for PETG ??? 3D Printer bed seems to bow closer. Or is it because the inductive probe values are drifting at 85° PLA at 65° build plate temperature has no issues, even this same 3d Printer Model [SOVOL SV08 Bed warping for PETG ???] Changing any Z of…

Thank you so much for buying from Sovol, and I apologize for all the inconvenience. Did you already send an email to info@sovol3d.com ? If not, please send the above situation with videos and pictures and your order number, and we will check with the engineers asap.

A condition in which a printed part or model warps or deforms. This problem is fairly common, but can be mitigated or addressed in a number of ways. Possible cause is lack of adhesion to the bottom layer: PETG may warp due to lack of adhesion when printing the bottom layer. Or improper print bed tem…

This helps, Raise the Nozzle without Homing [image] raise_Z Distance 5mm, Homing not require cfg file SV08 I would like to have this added to the SOVOL SV08 display screen, I don’t know if this is possible using SOVOL firmware? ############################################…

Double check that any part is totally flat, as large an area as possible, on the bed. I’ve had parts that look totally flat but when zooming if loading into TinkerCad they have a small lump that lifts the rest of the part off the bed and causes a printing problem. Slicer do not always seem to disp…

85 on the bed 240 nozzle 100 speed, slow for this printer. Dig the texture off the build plate. PLA prints GREAT… so thinking it must be Orca Slicer

Done, waiting told new build plate and nozzle will be sent THANK YOU. I will not dare printing anything but PLA . NOZZLE GOES TOO LOW orca slicer issue I think now T Heat soak fixed

SOVOL SV08 3D Printer Bed warping for PETG?

Sovol SV08

SV08_user September 5, 2024, 12:33pm 4

This helps, Raise the Nozzle without Homing

Topic		Replies	Views
ZOffset change Sovol SV08	3	2757	September 4, 2024
Trouble printing flat items Sovol SV06 Fully Open Source 3D Printer warping	5	1354	February 8, 2023
Bed won't level, Is the bed warped? Sovol SV03 BIG DD 3D printer	1	1058	October 10, 2022
No longer sticking to bed Sovol SV06 Plus	18	1197	April 8, 2024
Print failures and crazy noise / sounds with new SV06 Plus Sovol SV06 Plus	31	2160	July 11, 2023

SOVOL SV08 3D Printer Bed warping for PETG?

Related topics