Looking for profile setting to print PPA-CF?
Hello,
Welcome to our community.
Before posted, a quick hello would be appreciated.
HELLO! Hope everyone is having a good day. I fairly new to 3D printing and Ive had good success with my SV08 printing with PEG and PETG. I want to print some things out of PPA-CF but am having a hard time getting my settings dialed in. Any help would be appreciated
There not settings in this link, but there is some info you might need.
Who’s filament are you using?
I discovered you can download a bambu .3mf project and open it with Orca. It will complain about the filament and printer being unknown but will open it.
Click on edit filament and save with a new name
Save the process with a new name
THEN change printer to your SV08.
BOOM all the settings are transferred. You might need to tweak speeds and accelerations but the one I opened seemed pretty conservative. I’d just set speed to 50% in Fluidd (or mainsail) and bump it up 5-10% at a time until I liked the results.
Print setting Files Download
Is where I got a .3mf to play with.
Heck yea, I appreciate it. Such a help and the filament is Siraya
Did you get a decent print?
At first I thought a .3mf was a stupid way to share profiles but it worked better than any other method I’ve seen.
1 Like
havent tried yet. I will keep you updated though