That a Is all it is [IMG_20241002_091025]

Maybe a network problem. Is the port 7125 opened on your router ?

Thank You: The small display on the SOVOL SV08 is Booting for ever message!!! Even my Fix does not fix it, see below video for this My Forever Booting fix. No Internet access ONLY PUTTY SSH seems to logon via LAN cable. Just fitted a new purchased control board today 12 October 2024 and this wor…

Sorry, I can’t help you, I don’t own such a machine. Have you send a mail at info@sovol3d.com ?

This is the simple, yet unlikely to fix anything solution: Check to make sure that your firewall allows access to your printer. However, this problem, and solution, looks to be exactly what you are experiencing: https://www.reddit.com/r/klippers/comments/1df9da0/i_cant_connect_to_moonraker/ Read …

this has nothing to do with whatever firewall or router, since this is a connection from the printer to the printer itself (127.0.0.1 = localhost) It looks like the moonraker service that will listen on port 7125 is unable to start because of an error and therefore the interface cannot connect to i…

I had to Purchase a new control board, now no WiFi, (same settings as before that worked), so have to use LAN

Inductive Probe may get fixed edit cfg file [Let's tweak the Sovol SV08]

[image] wrusman: this has nothing to do with whatever firewall or router, since this is a connection from the printer to the printer itself (127.0.0.1 = localhost) It looks like the moonraker service that will listen on port 7125 is unable to start because of an error and therefore the interfac…

[image] SV08_user: I had to Purchase a new control board, now no WiFi, (same settings as before tat worked), so have to use LAN So I’m confused. What was wrong with the original board? (you mentioned removing a resistor, what’s that all about?) And if it was defective, why wouldn’t Sovol repl…

SOVOL SV08 buy a brick

Sovol SV08

wrusman October 4, 2024, 8:31am 7

I see this is confirmed by the topic starter himself in Do not try to install Octoeverywhere Bricks control board: FIXED

Topic		Replies	Views
Sv08 max two bad main boards in a row! Sovol SV08 MAX	16	202	March 27, 2026
Do not try to install Octoeverywhere Bricks control board: FIXED Sovol SV08	2	319	December 6, 2024
Tried putting my sv08 on mainline klipper and now I'm stuck on booting screen Sovol SV08 firmware , advice , klipper	9	2138	December 26, 2024
Major issue Sovol SV08	14	792	November 18, 2024
First boot Klipper error Sovol SV08 MAX	69	671	October 31, 2025

SOVOL SV08 buy a brick

Related topics