Do not try to install Octoeverywhere Bricks control board: FIXED

Sovol SV08
1

Do not try to install Octoeverywhere Bricks control board

Octoeverywhere is suppose to allow you to view and control 3D printers from any where.
This works with some other 3D printers and can be very handy if you have to check or even control your 3D printer from other places.
I tried to install it using Putty SSH following there instructions but it totally brock my Sovol SV08 Control board.
Now it is suck in Booting for ever, even my fix for the Forever Booting problem, see video below, did not fix it.
Now I have to purchase a new controller board for my Sovol SV08.
Forever booting fix video:-

FIXED:
I re-uploaded all the Original Config files, THIS FIXED THE ISSUE, Luckily me to have backed them up :slight_smile:

Note reflashing the firmware did not help; BUT IT HAS NOW GONE BACK TO BEING A BRICK!!

IMG_20241002_091025
IMG_20241002_0910251920×864 138 KB

2

i have the same issue i cant get my big screen to change from black screen and my little screen stays stuck in boot screenidk wat to do ive tried everythin been like this for a couple weeks now any help would be amazing

3

Hi,
Open a ticket at Sovol with pics or video and order number.
info@sovol3d.com