Hello all, I bought a Sovol SV06 on Facebook market and I cleaned it up. Re greased the rails and rods. Checked all the screws and plugs to make sure all was working properly. I took apart the Hotend and made sure that the nozzle and heat end works. I set the z off-set and leveled the bed. all work…

It looks like it thinks there was a power outage… Do you get a prompt that says Resume Print & Stop Print..?? If so, click on Stop Print.

yes, I have done that. But it happens every time I try to print anything. I haven’t printed anything with it yet. It heats up and says its about to start print and then stops and I get the prompt. it wont go past the heating up bed and nozzle then moves to start print and then stops. I shut it off, …

This isn’t my first printer. I have Ender 3 , ender 3 pros, ender 3 s1, ender 3v 3 se, K1max, a1, a1 mini, neptune 3 pro, plus and max. sovol SV0l, SV07 plus. I own may printers. Usaually a firmware update or older version firmware fixes things. I bad plug or thermister, a bad motherboard but all se…

It might sound obvious, but have you checked the power setting…115v-230v. Also, can you get to the Main Screen at all..?? If you can, go into Configuration/Advanced Settings/Initialize EEPROM… then Configuration/Restore Defaults.

yes, ive done all that. nothing.

My only thought is to re-flash Marlin again. Have you tried starting the printer with the SD Card removed…maybe it’s something in your code. Are you using Cura or Orca Slicer..??

is that not the updated firmware? if not where do i get that marlin flash? I have used Bambu, Creality, Cura, Orca slicers. ill try the sd card thing now. ill let u know how that works.

Each slicer has it’s own Start Gcode, the SV06 came with Cura…so stay with that for now until it’s fixed. You can find the firmware here, with & without filament sensor: [image] Firmware Download SOVOL SV01 SV02 SV03 SV04 SV05 SV01PRO SV06 SV06PLUS SV07 SV07PLUS COMGROW LASER Z1 Z1PRO …

ok but, is that firmware on sovol.com the firmware for marlin?

The link above is for Marlin, Sovol didn’t start using Klipper until the SV07. The 1st round of SV06’s came without a filament sensor..mine has a custom install..about 3-6 months later, Sovol added a filament sensor to the SV06. That is why there are 2 different firmware versions.

Sovol SV06 power outage?

Sovol SV06 Fully Open Source 3D Printer

Lion November 15, 2025, 4:20pm 13

It’s a great printer, your should look into the SV06 Plus if you need something bigger

Topic		Replies	Views
Power Outage Error Sovol SV06 Fully Open Source 3D Printer	3	162	December 11, 2024
Lose of power issue Sovol SV06 Fully Open Source 3D Printer	3	244	January 13, 2023
Sovol SV06 Won't Power On Sovol SV06 Fully Open Source 3D Printer	3	630	January 18, 2024
Sorry folks, just a cry for help Sovol SV06 Fully Open Source 3D Printer	6	372	January 27, 2024
SV06 Plus Midprint lockup Sovol SV06 Plus challenging	38	1219	May 7, 2025

Sovol SV06 power outage?

Related topics