Hi! When leveling bed via the menue I’m getting a Z-Offset of -1.95 When saving and restarting the printer it changes that value to +1.95, so a difference of 3.9mm - it prints into the air! So I have to lower the Z-Axis every print manually by 3.9mm while the print starts -.- How to avoid that? …

Addition: I bet this guy has the same problem [image] Can't get the probe z offset to work on sv06 Sovol SV06 Fully Open Source 3D Printer Did anyone find a solution for this? My sv06 out of the box does absolutely nothing when i cluck on the z offset. The numbers on the s…

I’ve recently got a SV07+ too and was having the same issue. “Solved” it by doing the z-offset calibration via the Klipper WebUI (mainsail). Other calibration didn’t have any problems and the benchy preinstalled on the USB printed well. Prints as expected via both the touchscreen and main sail. On…

Sovol S07+ doesn't save negative z_offset correctly - firmware bug

Sovol SV07 Plus

ForenSeil February 10, 2024, 7:53am 2

Addition: I bet this guy has the same problem

Topic		Replies	Views
SV06 plus z-offset stuck too low Sovol SV06 Plus leveling	20	660	September 1, 2024
Z-axis caibration issues / bed leveling Sovol SV04 IDEX	9	2811	January 13, 2023
Sovol 07 z Offset calibration problem Sovol Klipperized SV07	9	198	September 16, 2025
SV06 Plus ACE Z Offset problems Sovol SV06 Plus ACE firmware , leveling	22	502	May 8, 2025
Extreme Z-offset and bed leveling no longer running Sovol SV06 Fully Open Source 3D Printer	14	3360	August 11, 2023

Sovol S07+ doesn't save negative z_offset correctly - firmware bug

Related topics