My sv08 appears to have just randomly developed cracks in its body. How much does this matter? Should I do anything or is it ok to ignore? I’m not sure what to think. [20260330_193339] [20260330_193403] And the other side looks like it is developing a crack. [20260330_194151]

Contact info@sovol3d.com with your purchase info & pictures. If you didn’t buy from Sovol, you’ll have to contact wherever it is you bought it from. This is the first I have seen this issue, they kinda look like stress cracks to me…JMO I will also send a PM to @sovol3d to look at this also.

Hi, I PM you. Please give me your order number and email address.

Hey, how you doing? I’m having the same issue in the external “legs”. Was your issue resolved?

I haven’t attempted to swap it yet. Given the amount of work it is likely going to involve I am waiting for a good time to dedicate to it.

Oh, nice. So at least you got the parts required to fix it. I’ll contact them and see if they can help me. Thanks!!

HI Same issues here, My printer arrived about a month ago, has been on the same table ever since, it sometimes makes a loud cracking noise (which I didn’t realized what it was) and now is clear! It happened on the Z3 corner! [WhatsApp Image 2026-07-16 at 9.32.27 AM] [WhatsApp Image 2026-07-16…

If you contact support they will likely send you a replacement body. However, it is a daunting task to replace the body. You essentially have to dismantle the entire printer including the electronics underneath and reassembe on the new body.

Yes, I’ve contacted them, first the official support email, but since I bought it from the ebay official store, they made me contact them… But their answer was unbelievable: they basically said that this had not happened before, that it was very strange, but since it would not compromise the printi…

Hi @sovol3d , Could you check with your technical support team to find out what the problem is with this request? Cheers

My sv08 randomly developed cracks in the body

Sovol SV08

csmall March 31, 2026, 2:33am 4

Thank you. I replied and sent the email also.

Encloser Lower Door Stopper Screws Don't Fit?

Topic		Replies	Views
SV08, endless scrap? Sovol's support fails Sovol SV08	24	1341	May 4, 2025
Sovol SV08 crashes into bed and "dances" Sovol SV08	4	493	October 6, 2024
New Sovol sv08 Crashes when printing Sovol SV08 bed-leveling	1	133	August 28, 2025
Error Code: 7 Sovol SV08	3	659	May 31, 2025
Brand New 07 (Not Plus) faulty Sovol Klipperized SV07	19	164	March 15, 2025

My sv08 randomly developed cracks in the body

Related topics