When i auto z align the extruder raises to the top grinding permanently

I fixed it bought a new flash card and reinstalled software.

Mine too. Just got it yesterday. Curious about it, so you posted. It is hitting hard. Manual says will make some noise, but this is a bit more than some. Didn’t see manufacture date on box, so I don’t know when it was made. Pretty happy though. Set up machine, in less than two hours. Turned on and p…

Ya my printer is useless at this point… yours is doing it too? Why are you happy?

Mine is grinding up there permanently like 30 minutes or longer. I dont think we have same problem

Sorry,just noticed. It did one time at beginning but it was loud. I’m used to difficult printer, since first was creality ender3 v2, and came in all mostlly pieces, so had to put together almost completely. Check Reddit for some better threads on that issue you are having. More chances to find solut…

Ya i was getting a bluescreen i switched cards and driver and it fixed the bluescreen. But now the gantry grinding is a dealbreaker i hope they have a fix. I saw others with the same problem. I will try reddit, im not familiar with them. I would hope that sovol would respond. Ive been trying to buy…

It’s the budget printers. Compared to Creality, the Sovol is really nice. I first got their filament dryer, and the customer service was amazing. Notified shipped, upon arrival one more email, and then one of the reps sent me message how I liked the dryer. Compared to creality, send emails about que…

Check your end stop. I changed to an all metal hotend and rerouted wires, when I did a wire was stopping the hotend from actually hitting my X limit switch. Might be something as simple as that?

did you try this then or what are your numbers in there? [image] Extruder hitting gantry when homing Sovol SV06 Fully Open Source 3D Printer i think mine is also doing some really lound grinding noise, but more like 4-5 seconds… someone also said that he just manually ch…

Extruder banging to gantry permanently

Sovol SV06 Fully Open Source 3D Printer

iprint6 April 1, 2023, 2:50pm 10

did you try this then or what are your numbers in there?

Topic		Replies	Views
Extruder vibrating/grinding Sovol SV06 Fully Open Source 3D Printer	2	509	July 24, 2023
Extruder hitting gantry when homing Sovol SV06 Fully Open Source 3D Printer	6	1869	March 20, 2023
Loud, fast clicking Sovol SV06 Plus	3	77	August 8, 2025
Sovol Sv06 no print finished Sovol SV06 Fully Open Source 3D Printer heat-creep	57	3874	December 9, 2024
Sovol SVO6 fails printing around the same layer each time Sovol SV06 Fully Open Source 3D Printer	43	4270	April 17, 2024

Extruder banging to gantry permanently

Related topics