Working Beacon Rev. H with Stock Firmware

Hi there.

I hooked up my Sovol SV08 with a Beacon Rev. H Probe and now the Printer works every time.

I installed the Beacon Probe and plugged it in on the free USB Port on the Board.

Then i followed this Guide.

Some fine tune at the Configs and it worked like a charm.

I cannot upload any files here because im new.
So i uploaded it on ddownload.

http://ddl.to/d/66r2a

Feel free to use it, contact me if you have any suggestions or Tipps.

regards
cryoplay

1 Like