What is the connector type for toolboard

[PicobelloBV]

Does anyone know what connector type it is?

I know it is not JST XH 2.54, JST PH2.0 or JST ZH 1.5.

Is it JST GH maybe?

[MikeHides]

Hi @PicobelloBV

The connector is 2.54mm XH, it has a barb. This post has a list of sizes and kits for most of the connectors if you need more.

Cheers,
-Mike

JST Connector type for K_FAN3

Hi @chartjes The connector is 2.54mm, pictures below. I used this kit (JST-XH 2.54mm Male/Female 28AWG pre-crimped silicon wires.) I find the sets below fit most of the connectors on the Zero I’ve run across so far. Cheers, -Mike JST connector List (Amazon Links, probably cheaper elsewhere) JST/Molex PicoBlade 1.25mm Male/Female 22AWG pre-crimped silicon wires. JST-PH 2.0mm Male/Female 24AWG pre-crimped silicon wires. JST-XH 2.54mm Male/Female 28AWG pre-crimped silicon wires. Phone ca…

[PicobelloBV]

Thanks! It looks like it is the 1.25mm Molex Picoblade.

[MikeHides]

Thanks for the correction @PicobelloBV much appreciated.

Cheers,
=Mike