JST Connector type for K_FAN3

Hi @chartjes The connector is 2.54mm, pictures below.

I used this kit (JST-XH 2.54mm Male/Female 28AWG pre-crimped silicon wires.)

I find the sets below fit most of the connectors on the Zero I’ve run across so far.

Cheers,
-Mike

JST connector List (Amazon Links, probably cheaper elsewhere)
JST/Molex PicoBlade 1.25mm Male/Female 22AWG pre-crimped silicon wires.
JST-PH 2.0mm Male/Female 24AWG pre-crimped silicon wires.
JST-XH 2.54mm Male/Female 28AWG pre-crimped silicon wires.

Phone camera did not like the flashlight I used!