Hello friends. I have built a Nevermore Micro v4 and want to know what type of JST connector plugs into the 4 pin K_FAN3 connector on the main board. The one on the fan I have is too small. Thanks in advance.
Hi @chartjes The connector is 2.54mm, pictures below.
I used this kit (JST-XH 2.54mm Male/Female 28AWG pre-crimped silicon wires.)
I find the sets below fit most of the connectors on the Zero I’ve run across so far.
Cheers,
-Mike
JST connector List (Amazon Links, probably cheaper elsewhere)
JST/Molex PicoBlade 1.25mm Male/Female 22AWG pre-crimped silicon wires.
JST-PH 2.0mm Male/Female 24AWG pre-crimped silicon wires.
JST-XH 2.54mm Male/Female 28AWG pre-crimped silicon wires.
Phone camera did not like the flashlight I used!
1 Like
Greatly appreciated.
1 Like