Hello everyone, Can we use the USB port with a pendrive instead the MicroSD card for the printing?

No, but you can purchase a Beagle camera and connect to the USB that way, it has the added advantage of lapse time recordings of your prints. You can also connect to your printer remotely from your phone or other device and check your print while away from home.

I cannot get my SV06+ or SV06 to connect to anything via the micro USB port. I tried windows 10, four flavors of linux on laptops, and finally a raspberry Pi. nothing sees the printers or even detects the serial controller in both printers.

I use octoprint at a raspi 4 on my sv06 and they find the correct port an connect it. You tried already a different cable? Maybe it’s only a charging micro USB cable with two wires inside, I had also the problem that my printer will not connect after I changed the cable it’s working.

My Windows pc needed a Serial USB driver. This one worked with Cura and found it correctly after installing the driver. [image] USB to Serial (RS-232/DB9): CH340/CH341 Driver [Download] | Device Drivers This driver will let you use USB to serial programmable devices with the ch340g/ch3…

It sometimes works. Might have to modify the printer.cfg file to point to the mounted usb drive. I had to put gcode files in the root directory on the usb drive to find them.

Using the USB port

Sovol SV06 Plus

Guba June 20, 2023, 6:24pm 2

I tried it, unfortunately it does not work.

Topic		Replies	Views
Use of USB with Sovol Sovol SV06 Plus	2	3875	November 19, 2023
Dumb Question SV07 Connect via USB Sovol Klipperized SV07 challenging	5	941	November 3, 2023
SV01 Pro no USB connection to any computer Sovol SV01 Pro firmware	1	963	September 22, 2023
What USB Type on Sovol SV06 (RESOLVED) Sovol SV06 Fully Open Source 3D Printer	0	1998	February 14, 2023
SV06 Plus and ethernet connection Sovol SV06 Plus	4	4590	March 19, 2023

Using the USB port

Related topics