Hey guys, complete beginner here. Got my brand new SV06 ACE this week, it’s been printing small objects like a charm, but trying to print the first bigger one made a bit of a mess. I checked the bed mesh and got this (see attached) I don’t know how accurate the auto-levelling is, but it doesn’t see…

Hi, Don’t take this drawing into account, mine is not better and yet my printer is working properly.

For small objects this shouldn’t matter. But for larger ones you’ll experience bad first layers. This is a very common “issue” with most modern printers. See here how I resolved it in my case in under 30 minutes. Ideally you want to get the min-max range below 0.2 mm so that the automatic bed level…

[image] Warped Bed Question Sovol SV06 ACE I glued hole reinforcement rings made of paper to the lower parts under the screw connection of the print bed and compensated for the uneven height. [image]

Tilted bed advice

Sovol SV06 ACE

Oliver January 25, 2025, 4:46pm 4

Topic		Replies	Views
SV06 ACE rough first layer Sovol SV06 ACE	9	411	December 24, 2024
Issues with first layer on Sovol SV06 Plus ACE Sovol SV06 Plus ACE bed-leveling , leveling	11	296	October 20, 2025
Bed tramming Sovol SV06 ACE	11	696	December 24, 2024
Warped Bed Question Sovol SV06 ACE bed-leveling , advice , leveling	21	1292	April 25, 2026
Bed not level only in one area Sovol SV06 Plus ACE advice , leveling	7	66	February 13, 2026

Tilted bed advice

Related topics