Does anyone know where I can get the firmware for my sv06 plus. It looks like i need to reflash mine but im unable to find it on the site.

There is no new sv06 plus firmware yet, if there was it would be here Firmware Download | Sovol3d Unless you have been messing with some 3rd party firmware you should not need to flash a new printer.

support got me the firmware. I wasnt messing with any 3rd party firmware.

@georgemoody whats a fellow sv06plus owner gotta do to get a copy of the firmware ?

Below is the firmware they gave me. SV06 PLUS firmware-2/23.zip Google Drive file.

The firmware says 2.23, but after I “think” I flashed it. (renamed to firmware.bin, put on formatted sdcard and booted). it still shows the original firmware (1.1.4) No idea how to check the firmware of the screen.

Same for me, not sure if it flashed or not. doesn’t say 2.2.3

2.23 is a date code, it’s actually the firmware that ships with the SV06 Plus

Would this be the problem with my printer nozzle dragging on the print ? Can the sv06 plus loose program from a power outage?

I’m having many issues and the nozzle getting too close to the bed when it starts printing is one of them. I can set the z offset a hundred times and get it just right… and then as soon as it starts a print the damn thing must drop by a couple millimeters and just start scraping.

I think the sensor on my printer head unit is burned out on how far the headspace distance is. It lights up reading on setting the headspace but when printing it’s not lifting the head off the print and no light flashing on sensor…

SV06 Plus firmware

Sovol SV06 Plus

georgemoody March 29, 2023, 8:18pm 5

Below is the firmware they gave me.

Topic		Replies	Views
Firmware v 1.1.5 Sovol SV06 Plus firmware	18	2616	July 9, 2023
Sv06 plus stops printing Sovol SV06 Plus	39	313	February 12, 2025
Sovol SV06 Plus Firmware flashing Sovol SV06 Fully Open Source 3D Printer firmware	1	1531	May 8, 2024
Sv06 Plus screen is stuck on the logo Sovol SV06 Plus firmware , advice	10	1853	March 19, 2024
Firmware on new SV06 says V.0.0.0 Sovol SV06 Fully Open Source 3D Printer firmware	2	344	February 11, 2025

SV06 Plus firmware

Related topics