I greet you. I have such a problem, recently I was printing an object and I forgot that I had it on the shelf. The Z-axis crashed into the printout… Unfortunately, I didn’t check it, it’s my fault, I know… But now whenever I want to print something or put auto home, or bed leveling, it crashes into …

Let me see if I get what your trying to say… You started a new print but you already had a print of the plate & the Z Axis crashed into it. When you try to home or bed level the nozzle crashes into the plate. The probe no longer blinks when it gets close to the plate. Is this close to what your …

Yes, it’s exactly as you say… Whatever I want to do is just hit the mat… It won’t stop and just crash

Read this & see if it helps. [image] Auto Home crashes into bed Sovol SV06 Plus Hello, Had to buy a new sensor and after I’ve installed the new one I can’t get the printer to work right. Whenever I try to calibrate it, it has to do an auto home first and it always crashe…

Several timesI tried to load a new firmware but I don’t know which one is the last one. On the sovol website I found V2 0.0.A but I have it there since I bought the printe [IMG_20250301_121004] r…

You don’t need to install any firmware…that won’t fix anything. You just need to reset your Z-Offset & maybe your probe. I’ll be gone most of today & tomorrow, so someone else may help you.

You can also check if the probe is correctly positioned. By removing a printed model from the plate, you can touch the probe, which can disrupt it.

Several folks have done that. (Me, too.) That usually ends up pushing the sensor up into the black tube. You will have to take the extruder cover off and push the sensor back down. The sensor has to be able to sense the metal print bed.

Sovol SV06 Problém

Need Help

Lion March 1, 2025, 3:35am 4

Read this & see if it helps.

Topic		Replies	Views
Extreme Z-offset and bed leveling no longer running Sovol SV06 Fully Open Source 3D Printer	14	3450	August 11, 2023
SV06 plus z-offset stuck too low Sovol SV06 Plus leveling	19	760	September 1, 2024
SV06+ 'Z=0.0' with any change in Z height Sovol SV06 Plus firmware , leveling , homing	11	1970	June 30, 2023
Probe won’t detect bed Sovol SV06 Plus firmware , leveling , homing	16	424	August 4, 2024
Auto Home crashes into bed Sovol SV06 Plus	12	786	July 20, 2024

Sovol SV06 Problém

Related topics