[IMG_20260116_100829923] Hi there. I got a Sovol SV06 printer for Christmas so I’ve had it for about 3 weeks. I’m brand new to this and have no clue what I’m doing, so bear with me. The filament that came with the printer worked fine with absolutely zero issues. I recently purchased this spool of …

[IMG_20260116_102013091] This is what the cube looks like when done.

Did you clean the bed before printing?

Yes. I don’t believe that’s the issue. It worked perfectly fine with the old filament, but is super screwy now with the new stuff.

I’m going to second that it didn’t stick. Cubes are a little rough to do because the sharp 90degree corners like to lift. A “right now” solution is to put “mouse ears” or a brim on the print to keep it stuck… but there are a few other things to check to get the best result. Changing filament will m…

Can you provide some tutorials for these? Like I said I’ve owned my printer for about 2 weeks, so not sure how to do that stuff. I appreciate your help.

[VID 20260117 065948629] I made some video of the cube print. The cube print is pretty small but we’re just trying any print, and it all messes up. It doesn’t look like it sticks at all. I didn’t get video of it but when I canceled the print, the nozzle went up and pulled the whole prin…

Hi, Not sure but it seems to me your nozzle is much too high. You will probably need to adjust the Zoffset.

Can you provide a tutorial or explanation on how to do that? As I said I’m brand new to this.

First of all, did you perform an automatic leveling?

[image] My SV06 keeps making spidery messes and knocking the print out of place Sovol SV06 Fully Open Source 3D Printer sorry how would i fix the Z-Offset i am very new to this That is your “other” account…right..??

Sovol SV 06 Not working at all with new filament

Sovol SV06 Fully Open Source 3D Printer

Lion January 17, 2026, 6:23pm 11

That is your “other” account…right..??

Topic		Replies	Views
My SV06 keeps making spidery messes and knocking the print out of place Sovol SV06 Fully Open Source 3D Printer advice , filament	20	264	January 27, 2026
Really confused Sovol SV06 Fully Open Source 3D Printer advice	7	399	April 20, 2024
No longer sticking to bed Sovol SV06 Plus	18	1217	April 8, 2024
Can't figure out how to print with this thing Sovol SV06 Plus advice , leveling , klipper	17	537	September 2, 2024
Brand new sv06 not working! (first layer leveling problems) Sovol SV06 Fully Open Source 3D Printer challenging , homing	15	1811	July 20, 2023

Sovol SV 06 Not working at all with new filament

Related topics