So for the last few prints, I’ll walk in and my printer has made a spidery mess of filament and the entire print is knocked out of place. Why? I really need to use this soon, so I’d appreciate a quick response but if not that is okay. [DSCF0031] example image

Go to the Sovol Wiki Download the user manual. Read the manual. If you have questions post them here and refer to the manual page you don’t understand.

From the 1 blurry picture… The left corner has lifted up, maybe warping, maybe you just need to clean your plate. The stringing looks like your Z-Offset is set wrong. Have you changed the nozzle or done any calibrations lately..?? The 1st thing you need to do is wash your plate..use Dawn & hot w…

alright and i did just change the filament it out maybe i screwed up there

thx (aaaaaaaaaaaaaaaaaaa for the 20 character limit)

new problem, the plastic is getting stuck to the nozzle and just builds up in a pile

What kind of filament are you printing with..PLA, PETG, TPU..?? Also, what are the hotend & bed temps..??

i have zero idea about the filament bed temp is normal 60C i am going to assume the hotend is the nozzle and its also normal 180C

We need to find out what filament you are using… AFAIK, the only filament that prints below 210* is Sunlu Meta PLA…which is around 160*-170*. So filament temp is most likely your problem. Look on the spool or box for what type & brand you are using.

Sovol PLA filament hope that helps

My SV06 keeps making spidery messes and knocking the print out of place

Sovol SV06 Fully Open Source 3D Printer

dih-fondler January 11, 2026, 8:51pm 4

sorry how would i fix the Z-Offset i am very new to this

Sovol SV 06 Not working at all with new filament

Topic		Replies	Views
Sovol SV 06 Not working at all with new filament Sovol SV06 Fully Open Source 3D Printer	18	75	January 18, 2026
Really confused Sovol SV06 Fully Open Source 3D Printer advice	7	404	April 20, 2024
Filament non sticking to the plate, Sovol SV06 Fully Open Source 3D Printer	2	427	February 18, 2024
SV06 - bunching up and not sticking to bed Sovol SV06 Fully Open Source 3D Printer advice	27	2578	April 24, 2024
No longer sticking to bed Sovol SV06 Plus	18	1287	April 8, 2024

My SV06 keeps making spidery messes and knocking the print out of place

Related topics