Replacement build plate for SV04

[Bjoern]

There I wrote how I replaced it:

Glass bed on the SV04

Hi there, the printing bed surface of my SV04 worked well just for a few days. Despite exact bed leveling & cleaning my prints warped or did not even stick to surface without any extra adhesion stuff. I had been using a FR4 fiberglass plate on my SV01 printer for years without any adhesion issues at all. Therefore I got rid it of that pesky bed coating & put a matching 1mm FR4 plate to the metal plate instead. The bed coating was easy to remove with a hot-air gun. The remaining glue on the met…

Those 310x320mm FR4 plates are cheap & widely available on eBay, Amazon etc.