We had a brief power outage with 3 printers (2x SV06 Ace and 1x SV06 Plus Ace) with a total of approx. 14 hours print time. The printer screens did not show any way to recover the prints and I couldn’t find anything online. Do these printers not have a print recovery option after a power outage? PS. In the process of buying a UPS but this is a rather expensive option.
Klipper doesn’t have a recovery option.
The UPS I use is the APC-650, I run 2 printers on each unit.
When you find them on sale they are about $75.
1 Like
I have successfully saved interrupted prints manually. I have also caused (semi violent) nozzle crashes trying to do it.
Set your print speed to 10% and slowly ramp it up if the nozzle is actually printing on top of the existing layers.
1 Like