Hello, good morning. I’ve been having this problem with my Sovol Zero for a couple of days now. After installing an M600 in Orca Slicer, the machine has been malfunctioning. I need some help or a solution because I’ve tried several solutions and nothing has worked. [IMG_20260320_110230] [IMG_20…

Hi @Vallejosmateo1 Welcome to the Forum! :tada: Can you list the filament brand you are using and describe the issue a bit more? It will help folks better understand what is happening. Cheers, -Mike

Hi @MikeHides , I’m using GST3D High Speed filaments. I’ve always used them and my prints have always come out perfect.

[image] Vallejosmateo1: GST3D Looking at the prints, specifically the partial Benchy/cube prints, your nozzle might be under extruding or partially clogged. Couldn’t hurt to also check you have the correct filament profile chosen in OrcaSlicer for the GST3D filament. If you remove the M60…

I have High Speed filament selected in the filament profile. Regarding deleting the M600 command in the G-code, I already did that, but it’s still printing the same way. I cleaned the entire nozzle and extruder, and they look like new, but the poor print quality persists.

Hi, Could we see the print result?

M600 is filament change. Sovol’s macro [gcode_macro M600] gcode: PAUSE STATE=filament_change Sets a variable then calls the PAUSE macro [gcode_macro PAUSE] rename_existing: PAUSE_BASE variable_state: 'normal' gcode: {% if printer.pause_resume.is_paused == False %} {% set x_park …

Yes, I actually set it up to make keychains in various colors, and after that printing of different colors, the printer started printing several files incorrectly.

I’m not saying the main problem is the M600’s G-code, but it seems strange to me that the machine broke down after installing it. :slight_smile:

Hi This is the result of the printing; it’s supposed to be a whistle, but it doesn’t make a sound because it has holes where the air escapes. [IMG_20260324_190820]

What process did you follow to “install” M600? It certainly looks like you are under extruded. Perhaps this is your issue? [image] Sovol Zero – under-extrusion caused by worn extruder gear (Solution update - loose pin)? Need advice on replacement Sovol Zero H…

Printing problem after M600

Sovol Zero

cardoc March 24, 2026, 11:46pm 11

What process did you follow to “install” M600?

It certainly looks like you are under extruded.
Perhaps this is your issue?

Topic		Replies	Views
SV04 M600 Filament change Sovol SV04 IDEX	2	1160	January 24, 2023
M600 Sovol Sv08 MAX Sovol SV08 MAX klipper , orcaslicer	16	236	August 12, 2025
Sovol SV06+ suddenly wants to do a filament change instead of printing Sovol SV06 Plus solved	3	73	July 15, 2025
Multicolor with the SV06 ACE Sovol SV06 ACE	8	1518	January 29, 2025
Help Needed! Sovol Zero	7	172	September 23, 2025

Printing problem after M600

Related topics