I just replaced the stock nozzle on my printer with an E3D Nozzle X, first and foremost, the nozzle threading is shorter than the stock one, and I felt that would be in issue in itself. I went to manually adjust the extruder in order to accommodate the new nozzle, and for some reason I couldn’t lowe…

Hello, Have you moved the proximity probe ?

How can I do this? Is that the blue thing at the bottom of the extruder?

@Lion is right, if it hasn’t been done yet, first of all leveling again. I thought it was already done.

Is this any different from the klipper screen?

That is from the stock Marlin screen, so that pic wouldn’t apply to Klipper.

To save myself the time it would take removing parts and loosening the probe… Ill just buy a hardened steel nozzle with the same dimensions as the original. Since Im now aware that nothing on the extruder should sit lower than the nozzle, Its just best I get a nozzle meant for the Sv06 plus.

Nozzle wont go any closer to the bed

Sovol SV06 Plus

Lion December 22, 2024, 7:03pm 4

This should help.

Topic		Replies	Views
Nozzle too far from bed Sovol SV05 Cubic DD	1	367	February 3, 2024
Nozzle size question Sovol SV02	3	570	January 8, 2023
Right printer head issues? Sovol SV04 IDEX	14	527	August 25, 2023
Nozzle Distance Sovol SV06 Plus	4	180	January 12, 2025
My printer will NOT calibrate the nozzle low enough-KLIPPER Sovol SV06 Fully Open Source 3D Printer advice	17	200	September 6, 2025

Nozzle wont go any closer to the bed

Related topics