Hello ive got issues when i pause the printer even for a second when it starts its shifting the layer and prints in the air. I did couple calibrations but didn’t solve the issue also there is really strange noise from the bed when under calibration. Dont know if the issue is because of leveling or f…

Hi, Did you check this point : [image] My brand new printer crashes in to itself in the begginning of a print and never starts printing Sovol SV06 ACE Hello, You probably forgot a block of foam under the bed. Everyone forgets it. First of all, you have to flip the prin…

Yeah that it was you can even barely see it … Im uploading a pic so you can guy see where it is I’ve place it on top just for reference its in the middle of the bed plate . Ive removed it will update if all goes well [IMG_20250104_161323]

Still the bed doing noise when is doing the calibration but will seee when printing

Is it okay nozzle to scratch the bed like this also sometimes is missing the nozzle brush (some of the brush pins are missing and i dont event print always doing like this before printing [IMG_20250104_173422]

I’m pretty sure you forgot the foam block

I removed it and still doing like this after calibration and even factory reset

You’re talking about the block on the back of the printer between the bed and the rails. The one you can’t see?

Yea i took it out, then factory reset and still the nozzle is going there and scratching the bed plate, i don’t know why…

When you have done your factory reset, have you redone the automatic auto calibration?

Layer shift after pausing

Sovol SV06 ACE

mich0111 January 4, 2025, 3:59pm 2

Hi,
Did you check this point :

Topic		Replies	Views
Layer shifting problem? Sovol SV06 Plus	24	244	November 8, 2024
My brand new printer crashes in to itself in the begginning of a print and never starts printing Sovol SV06 ACE leveling , homing	6	204	January 4, 2025
Many Problems...sorry about my english Sovol SV06 Plus	22	189	December 21, 2025
SV07 - nozzle scratches on print Sovol Klipperized SV07 leveling	1	378	November 17, 2023
Every Other Print Results in a Layer Shift Sovol SV06 Plus ACE advice	3	51	February 16, 2026

Layer shift after pausing

Related topics