Hello, today i printed normally, then after turning my printer on again, Klipper wont connect. It seems to connect for a second then it shows Klipper connecting again on a loop. https://youtube.com/shorts/X54B-l2KP4U?feature=share

Hi, This might be a silly question, but have you checked the connection settings?

what settings? i just turned on the printer as always and now it keeps looping with klipper connecting

Hi @mattlamp Welcome to the forum, I don’t own a SV06 ACE but I’ve had a similar issue on my Sovol Zero printed fine, turned it off for the night, on boot the next day, connection errors. For me, the disk was out of space. Clearing up some of the older .gcode files resolved the issue for me. Ch…

Do have your printer configured to be controlled from Orca Slicer? The stock touch will not show klipper errors during the connection phase. What do you get in the [Device] tab of Orca?

It doesnt show anything since it cant connect to the device

How can i access the internal files if it doesnt connect?

Internet settings are the same as before. The device doesnt seem to reach the point were it tries to connect to wifi, its a loop with klipper connect as seen on the video i shared

Background: When you power on your printer 3 systems power on. The H616 system on module boots Armbian (linux) The MCUs (main and toolhead) Boot Klipper firmware. The display boots and plays a animation. This is hard coded and doesn’t reflect the actual activity happening between 1 <> 2 1.1) Whe…

I didnt try to connect via ssh, i can try if you can send me a guide. As seen on my video The machine reachs the point where it displays klipper connecting, then for a brief moment shows nozzle and bed temps (normal temps) then it seems to disconnect and tries again (displays klipper connecting)

Klipper Connecting issue

Sovol SV06 ACE

mattlamp May 3, 2026, 9:45pm 13

Orca wont show anything, cant connect to device. The machine shows temp display for a brief moment, then again 0/0 for both nozzle and bed and displays klipper connecting again. Its a loop

Topic		Replies	Views
Klipper Connecting... (forever) Sovol SV06 ACE klipper	12	227	August 7, 2025
HELP..Sovol klipper muc unable to connect error! Please advise Sovol SV06 Plus	6	290	February 24, 2025
Printer "turns off" during prints (something crashes?) Sovol SV08	14	211	September 2, 2025
Major issue Sovol SV08	15	754	November 18, 2024
Sovol SV06 with Sovol Klipper upgrade no longer connects to wifi or Mainsail Sovol SV06 Fully Open Source 3D Printer	2	237	December 27, 2024

Klipper Connecting issue

Related topics