So, background, I’ve had my t300 for a year and a half. Been an absolute workhorse for me. Few little issues here and there, no big deal. About a month ago, I started getting random errors, or the print would shut down at 90%. Just weird problems. Was getting some klipper errors. Tried rein…

[20251205_174556] sorry, it would only allow me to post 1 Pic at a time

Can you get into the machine with SSH? I’d like to see the klippy.log so we can see the actual errors not the dumbed down Sovol translations. I don’t know what user ID and password this machine uses. Try mks - makerbase and sovol - sovol. User ID and password are both case sensitive.

Also the new mainboard should be under warranty, Open a support ticket. Also check your power supply voltage. With 2 boards misbehaving and inconsistent errors it might be your main issue.

What’s the warranty length on the original equipment? I can’t SSH into it because I haven’t even had the opportunity to setup wifi on the new board.

Have you tried contacting Sovol by email at info@sovol3d.com ? Please include your order number. They will likely be able to help you.

Can you temporally move your printer close enough to your router to connect a ethernet cable? Alternately move the router to the printer but I assume that would disconnect your internet, which would be okay if you don’t end up needing to google something. It may be possible to SSH over serial. The…

I will give this a shot and see what i come up with. Thank you for the continued help

Issues with new board

Comgrow T300

Quinn4761 December 6, 2025, 1:36am 3

Topic		Replies	Views
Customer service is trash tbh Comgrow T300 challenging , firmware , bed-leveling , heat-fails , homing	6	349	November 30, 2024
Printer hangs on comgrow screen Comgrow T300	0	38	September 7, 2025
First boot Klipper error Sovol SV08 MAX	69	521	October 31, 2025
Printer "turns off" during prints (something crashes?) Sovol SV08	14	229	September 2, 2025
Klipper mcu error Sovol Klipperized SV07	3	1343	November 28, 2023

Issues with new board

Related topics