Description of those, and, if available or known, I’ve put on this wiki page on github , along with additional observations or solutions on the SV08 configuration page on the same wiki. As it’s a wiki, user contributions are possible and welcome. It’s my belief that a wiki is more suited for a col…

My post about the macro.cfg might be within the scope of your wiki? [image] Modified Macro.cfg for maintaining bed temp during QGL, ZOFFSET, BED_MESH Sovol SV08 I’m attaching my modified version of SV08 Macro.cfg This file allows the machine to perform the start print ma…

Hi, I’ve done it but I’m waiting for approval of @sovol3d

Absolutely. It sounds definitely like an improvement to the original configuration, and I suggest it to put it either under “configuration”, or under a new header “improvements”

Thanks for sharing. But putting it in the wiki, we should test it for a long time

By organizing information in a wiki will testing, and particularily amending, be facilitated.

I keep discovering quirks in the sv08 configuration

Sovol SV08

biggy238 December 29, 2024, 9:52pm 3

My post about the macro.cfg might be within the scope of your wiki?

Topic		Replies	Views
Modified Macro.cfg for maintaining bed temp during QGL, ZOFFSET, BED_MESH Sovol SV08	0	939	December 29, 2024
Addressing the 65°C Heat Bed Temperature During Calibration Sovol SV08 bed-leveling , advice , leveling , heat-fails	5	2043	July 14, 2025
WIP: Sovol SV08 - Optimized G-Code / Macro.cfg / printer.cfg and highspeed settings PETG Sovol SV08 firmware , klipper	3	3611	July 16, 2025
Macro.cfg Sovol SV08	2	615	December 28, 2024
Original Sv08 Configuration Sovol SV08	15	198	June 7, 2026

I keep discovering quirks in the sv08 configuration

Related topics