Bed is OK

[Liberty4Ever]

I had a similar problem when using an industry standard 165 X 165 mm PEI sheet on my Zero. The Zero build plate has the two finger tabs on the left and right and the plastic frame has a tab that protrudes upward in the center that doesn’t locate the build plate or align it to make it easier to install. The only purpose seems to be preventing the use of existing build plates for the Adventure 3, Ender 2 Pro, et cetera, so I filed off the plastic tab on the front of the frame when I was leveling the Zero’s print bed.

Build plates

I was planning to shim under the front screws that mount the bed to the Z axes to lift the front of my Zero’s print bed, but Gergo just posted a video that shows a more precise method of leveling the Zero bed, that’s not much more difficult. I posted a new thread detailing my Zero bed leveling adventures and misadventures. Gergo’s simple method removes the magnetic sheet and heated print bed, which has the added benefit of allowing me access to the injection molded plastic frame so I can mor…