[PXL_20240816_023858140_1] The test prints in the image above use the 0.2mm detail mode in prusa slicer I recently got a SV06, my first 3D printer, about a month and a half ago. About a week ago I started to find really bad oozing/ stringing on all of my prints (PLA), to the point that any functi…

Hello, The link of the settings picture is broken. Could you repair it ? For this type of problem, it is often the temperature or retraction settings that need to be fixed.

Btw, you might be able to find Prusa config files for the Sovol SV06+ on Printables.

Hello, I can’t give you the right settings for your printer and your filament because it is specific to each configuration. Nevertheless, I can give you an advice. If you want to use Prusaslicer, you can also use Superslicer, which is a fork of Prusaslicer, and which includes a comprehensive, hig…

Bad Oozing/Stringing on SV06

Sovol SV06 Fully Open Source 3D Printer

Lion August 16, 2024, 2:39pm 2

I don’t use Prusa Slicer, so I can’t help there.
Your retraction pic didn’t show, for you to get an idea here are the retraction settings in Cura.

I noticed in your filament pic, you didn’t have an Idle Temp set, set it to 185*.

Topic		Replies	Views
SV06 Stringing Sovol SV06 Fully Open Source 3D Printer	16	5519	January 18, 2023
Sovol SV06 stringing Sovol SV06 Fully Open Source 3D Printer	2	558	April 19, 2024
Printing different PLA than the one that came with the machine? SV06 stops after a few layers, no PLA extruded Sovol SV06 Fully Open Source 3D Printer	12	688	January 13, 2023
All prints have uniform defects at the same height, many many failed prints Sovol SV06 Plus	5	433	April 6, 2024
SV06 bad prints Sovol SV06 Fully Open Source 3D Printer	20	3480	February 8, 2023

Bad Oozing/Stringing on SV06

Related topics