Any SV08 users have experience with Co Print on that printer? What do you think of it?
Someone on tonight’s Sovol live stream on YouTube commented that he recently installed the CoPrint on his SV08 and he’s very happy with it. He said he prints the same things his friend prints on a Bambu with AMS, but faster and with less waste.
I saw an interview with BondTech on YouTube today and BondTech is expecting to release their INDX in November, with initial plans to support the Voron 2.4, RatRig V-Core series, The Sovol Zero and the Sovol SV08. I’ll probably wait for the INDX to hot rod my Zero and/or SV08. I almost never print objects in two or more colors but I’d like to be able to mix two different materials in the same print, TPU feet on a PETG-CF part, or print a peel away PLA support interface on a PETG part, but the INDX would also be good so I could load all of the filament materials that I usually use and change filaments before a print with a simple command from the slicer as part of the G code.
The INDX sounds very cool! Assuming that it works as advertised the proposed price is more than reasonable. Let’s hope for the best!