I set a pause at layer 30 in Orcaslicer (the machine’s Gcode is set to “pause”) to change the material. The printer head moves to the pause coordinates, and the print is canceled. The printer configuration is factory default; nothing needs to be edited. Pausing via the printer screen works correctly…

From memory, to insert a pause in your gcode, you need to write an M601 instruction.

The printer doesn’t recognize the m601 commands. I thought I wouldn’t encounter such problems after purchasing it. My Q1 Pro pauses right out of the box.

[image] Antes: The printer doesn’t recognize the m601 commands. I don’t find a M601 at Gcode | Marlin Firmware M600 is “filament_change” which is supported by the stock SV08 configuration. If you want to pause make sure your machine g-code is all uppercase on Orca. In linux Pause does not m…

M600 causes printing to be cancelled

[image] The ORIGONAL Macro.cfg supplied with the SV08 contains the following: [gcode_macro M600] gcode: PAUSE STATE=filament_change Which then calls the Pause macro as follows: [gcode_macro PAUSE] rename_existing: PAUSE_BASE variable_state: 'normal' gcode: {% if printer.pause_resume.is…

sv08 pause cancels printing

Need Help

Antes November 19, 2025, 4:48am 7

I don’t understand what was wrong. I replaced the macros with yours and everything worked. They look identical when compared. Thank you.

Topic		Replies	Views
Pause at layer with Orca Sovol SV06 Plus ACE	10	316	July 8, 2025
Pausing print to add magnets Sovol SV06 Fully Open Source 3D Printer advice , slicer	9	48	March 26, 2026
Pause in OrcaSlider Preview doesn't work Sovol Zero	5	256	May 21, 2025
Issues with SV08 resume print function Sovol SV08	3	396	December 13, 2024
M600 Sovol Sv08 MAX Sovol SV08 MAX klipper , orcaslicer	16	234	August 12, 2025

sv08 pause cancels printing

Related topics