[🥸]-Updated SV06 Firmware-[🥸] SV06V2.0.0A_2.24 Improved auto-leveling function. Added the function of saving z offset automatically. Adjusted the driver parameter of the motors. Activated the SENSORLESS_ BACKOFF_MM function, reducing the risk of the X-axis hitting the y-axis. Accordi…

Hi, I have serious isses with AutoHome on firmware SV06V2.0.0A_2.24. X axis doesn’t detect endstop anymore. Did a “Reset Defaults” in configuration menue Tried to increase stall threshold with M914 X240 . Then M914 to review the settings. But the motor continues to skip steps until firmware report…

@sovol3d please add links to previous firmwares with complete changelog for each version. We need it in case we want to revert to previous firmware.

@sovol3d Also please update source code with the latest changes

Hi Devirex, sorry for this causes you trouble. I’ve submitted your concerns as a ticket, and I’ll get back to you if I get any feedback.

Hi @Devirex Sorry for the late response. Based on your description, we’re not entirely certain about the issue you’re experiencing. In order to assist you better, we suggest that you try initializing the EEPROM option in the menu. This may potentially resolve the issue you’re facing. If initializ…

Hi, i tried to flash the 192a again. After hours of trying i found out that each name of a single firmware file on the sd card has to be unique and only will be flashed one time. So i after renaming the 192a.bin file to firm2.bin i was able to flash the old version. The issue persisted. I did a conf…

Also if it’s a new printer - don’t trust that the SD card they shipped with the printer is fully functional. Get a new, name brand 8gb micro SD card - can’t be bigger. The included SD card Windows could read/write to, but the printer just blue-screened and wouldn’t update. Pulled an old, logo hal…

Hi @sovol3d Is there any plan to update sv06 with latest marlin version with x twist compensation and input shaping? There are some unofficial versions by community but I think that would be awesome to have an official release.

SV06 Firmware UPDATE

Sovol SV06 Fully Open Source 3D Printer

sovol3d February 27, 2023, 2:32am 6

@kord2003 Thank you for your feedback, the request is forwarded to the firmware developers.

Topic		Replies	Views
Homeing problems Sovol SV06 Fully Open Source 3D Printer advice	0	354	April 13, 2023
ABL Issue Sovol SV06 Fully Open Source 3D Printer	8	120	August 11, 2024
My SV06 crashes into the stops when trying to auto-level Sovol SV06 Fully Open Source 3D Printer	7	50	April 1, 2026
Firmware on new SV06 says V.0.0.0 Sovol SV06 Fully Open Source 3D Printer firmware	2	344	February 11, 2025
SV06 Plus firmware Sovol SV06 Plus	18	3021	May 23, 2023

SV06 Firmware UPDATE

Related topics