SOVOL SV08 Anti Tangle detector SOVOL SV08 Anti Tangle unit. A piece of Junk. POOR DESIGN!! I had nothing much but problems with mine. I have to Hack it later in this video… This Bowden tube input side caused a LOT of issues. Always coming out. I had to try to hack to fix this… later in this vi…

Name: SOVOL SV08 Anti Tangle unit a piece of Junk part fix
Uploaded: 2024-08-21T08:02:16Z
Description: Watch this video poor quality anti tangle unit [SOVOL SV08 Anti Tangle unit a piece of Junk part fix]

I bought the one of BTT (SFS) and that works fine (there is only one sensor pin available on the sv08 but the SFS requiring two : you can plug only the anti tangle without the runout one and that it… or add a blue/black pill). This requires not having too much friction because the sensor adds a litt…

Thank you so much for buying from Sovol, and I apologize for all the inconvenience. Did you already send an email to info@sovol3d.com ? If not, please send the above situation with videos and pictures and your order number, and we will check with the engineers asap.

Watch this video poor quality anti tangle unit [SOVOL SV08 Anti Tangle unit a piece of Junk part fix]

After watching my dual Sovol filament dryer being lifted off the table three times (SUNLU Elite PETG) due to filament that was wound onto the spool wrong I looked into a means to detect this issue. The only one I could find that detects filament not moving with the extruder moves is the BTT SFS V2 b…

Is this a simple plug in to the SOVOL SV08 unit, replace the filament runout supplied? Or damage because pins are wrong, This is my worry??? [image] Smart Filament Sensor V2.0 1 pc Intelligent filament sensor to minimise material waste. Price: £16.95. 5 Customer Reviews. Delivery in 5 da…

Here is a simple fix for the Sovol SV08 anti tangle unit that But resulted if false positives. A piece of junk

I disabled mine and just use the filament run sensor. I wouldn’t mind finding something that replace both of them, but it just seemed very cumbersome to have both connected (And the original owner of the printer said the tangled detection had malfunction and messed up prints for him).

SOVOL SV08 Anti Tangle unit. A piece of Junk. POOR DESIGN!

Sovol SV08

SV08_user August 21, 2024, 8:02am 3

Watch this video poor quality anti tangle unit

Topic		Replies	Views
Here is a simple fix for the Sovol SV08 anti tangle unit Sovol SV08	0	269	September 27, 2024
Filament feeder on extruder 1 Sovol SV04 IDEX	2	315	July 8, 2022
What's the best way to feed filament through the filament runout detectors? Sovol SV04 IDEX	1	429	June 28, 2022
Filament Runout sensor problem Sovol SV06 Plus	9	1492	September 25, 2023
Filament feeder failures Sovol SV08 MAX	45	1776	April 13, 2026

SOVOL SV08 Anti Tangle unit. A piece of Junk. **POOR DESIGN!**

Related topics

SOVOL SV08 Anti Tangle unit. A piece of Junk. POOR DESIGN!