Recently my SV08 cannot print an jobs over a couple hours any solutions

Sovol SV08
1

My SV08 Stopped printing any job that takes several ours to print

4

We need more info…please explain.

5

What error message is displayed?

6

I get the error code 8. So last night I did a software update. I also started an new print job that normally takes 20 Hours. So far I am 14 Hours in no problem. I also slowed the machine down about 15% to see if this may help

7

Glad you are up and running.

If it errors again open the [Device] tab in Orca and see what the klipper error code says.

8

So It shut down again this time on the 16th our of a 24 hour run. Same 08 shutdown. I am not sure where to find the Klipper error code when I go to History it says Klippy Shutdown. Looking at the last message before shutdown I see

image.png
image.png952×127 4.84 KB

9

More Info So this is the Statistics It says the Print is in Process but I had the 08 Error it is stopped and will not restart

image.png
image.png1489×376 29.4 KB

10

Do you use Obico? Sovol preinstalls it but it is useless if you don’t subscribe.

Upload your klippy.log here. I want to see more of what is going on.

You can’t download the log from the Orca [Device] tab. Have to connect with a browser.

11

Obico will pause a print if it thinks it see’s something funny, it will give you a notification & ask if you want to continue…but you have to have the app installed on your phone.