New SV06 failed first print and now blue screen

Hi @Immrtchaos Sorry to read about the trouble. Here’s what the engineer suggests to rule out the bluescreen issues. I hope this helps! Let me know if you have any other questions.

  1. Remove the screen and operate it on the table as static interference may be causing the issue.
  2. Refer to the video and refresh the stock firmware. Before updating the firmware, please format the memory card by following these steps.
    (1) Press the Win+R key to open the command prompt;
    (2) Enter “cmd” and press Enter;
    (3) Enter “format/q H:/fs:fat32/a:4096” (note that “H” is the disk name of the memory card, please make sure to confirm the disk number of your memory card).

Stock firmware download: SV06V2.0.0A_2.24.bin
Reference video: