I’m trying to print with PETG with the Sovol 08 / Orca Slicer, the first layer seems to go well but after that the filament is very thin and falls apart in small pieces, i’ve an image but i’m new here and i do not know how can i share it.

What temp are you printing PETG at…?? It should be 235*-255* for most PETG. I have one that’s 270*.

Filament Settings [Screenshot 2025-01-25 164426]

For my part, I print at 235°C and bed 85°

Are you using the old style nozzle or the new style with the hole in the side…??

I’m not sure i’m new with sovol (i had a prusa 10 years ago) i’m sending some pictures from the nozzle [20250125_184147] i will have to disassemble the nozzle to clean it,i’ll be near the printer next wednesday i can give you more details, for now i want to say thank you for the time you two have…

Read this: [image] New SV08 today, Is it safe to print PETG? Sovol SV08 Hi. As title. I print mainly using PETG and having read of issues with nozzles, I’m worried that the 2 nozzles supplied with my new SV08 are the same type that have the issues. I’ll attach some pics…

Ok it looks similar i need to take my nozzle out and then compare it, i’ll do it next wednesday…thanks A sábado, 25/01/2025, 19:59, Lion via Sovol3d forum < notifications@sovolforum.discoursemail.com > escreveu:

check the infamous extruder idler gear

This is my nozzle [20250130_141919]

Hi The blue filament is PETG [1stlayer] [2ndlayer] and on 2nd layer i manage to take out this piece of filament [piece]

Issues printing with PETG

Sovol SV08

Lion January 25, 2025, 7:49pm 14

Read this:

Topic		Replies	Views
New SV08 today, Is it safe to print PETG? Sovol SV08 filament	12	1034	October 18, 2024
SV08 Ugly layers Sovol SV08	5	640	June 19, 2025
Surprise PETG failures Sovol SV08	4	112	March 7, 2026
What is causing this tearing pattern every so often? Sovol Zero challenging , filament	31	313	February 17, 2026
PETG on the SOVOL SV08 issues Sovol SV08	11	1552	September 17, 2024

Issues printing with PETG

Related topics