In 2025 I bought a Sovol SV08 and have practically never used it. Recently I started using it, and to my disappointment I’m running into some problems The first is with the heat bed. I printed some objects that fill the entire flat surface of the bed, and on the edges they came out not perfectly fl…

Hi, Welcome in this forum. First of all, have you calibrated your printer before use it?

Hello Mich, Yes, I calibrate It every time before every print

Could you post a picture of the mesh of your bed? What filament do you use?

[image] Silap: printed some objects that fill the entire flat surface of the bed, and on the edges they came out not perfectly flat but curled upward. This is a filament or print process issue AKA print warping. Not a printer hardware/config/calibration issue. [image] Silap: no filament …

Sure, this is before the last print, before the extrusion problem appear [IMG_20260812_064342_HDR~2]

Not sure is warping (?) the printed object stay attacched to the bed and the bed stay attacched to the magnet. I saw about the pin in the gear and I don’t have put the modification yet but I have pushed the pin in and tried to print but no change

There is a pin holding the feedng gear in, this can work loose causing feeding issues Fix https://www.printables.com/model/1020013-sv08-fix

Filament extrusion problem on Sovol SV08

Sovol SV08

cardoc August 11, 2026, 9:11pm 5

This is a filament or print process issue AKA print warping. Not a printer hardware/config/calibration issue.

Have you installed a spacer to keep the pin centered in the extruder?

Topic		Replies	Views
SV08 issues Sovol SV08	5	130	July 30, 2026
Suddenly poor print quality on two SV08's - solved with extruder idler gear Sovol SV08	30	3773	July 2, 2026
Random Under Extrusion problem Sovol SV08 advice	11	668	November 5, 2025
SV08 Stops Extruding Mid-Print Sovol SV08	20	1312	September 17, 2025
Filament wrapping around the nozzle Sovol SV08 advice , filament	13	436	December 31, 2024

Filament extrusion problem on Sovol SV08

Related topics