Hello, I have a serious problem with my SV06. I set up and leveled the printer according to the instructions. I finished with “store Settings”! With every print (regardless of whether the Benchy from the original Sovol SD card or a Benchy created in PrusaSlicer) the X-axis moves completely to the l…

Try this: [image] Extruder hitting gantry when homing Sovol SV06 Fully Open Source 3D Printer TMC values were at 68/65 (default after reset) - causing the death rattle. Setting both to 70 removed that horrible noise/tech issue. Printing has been fine. I have G28 and G29 a…

X-Axis Endstop

Sovol SV06 Fully Open Source 3D Printer

george February 21, 2023, 7:50am 4

Try this:

1 Like

Topic		Replies	Views
Extruder hitting gantry when homing Sovol SV06 Fully Open Source 3D Printer	6	1280	March 20, 2023
X-homing fault? Need Help	6	699	December 27, 2022
Worried about the 6 to 7 second X homing death rattle Sovol SV06 Fully Open Source 3D Printer homing	10	766	October 11, 2023
Sovol SV04 doesnt home properly Sovol SV06 Fully Open Source 3D Printer	0	243	April 21, 2023
SV06 Firmware UPDATE Sovol SV06 Fully Open Source 3D Printer official	9	4820	May 21, 2023

X-Axis Endstop

Related Topics