I recently bought an sv08 and it’s been working very well so far. Except that when the heated bed hits 97-98 degrees C the circuit breaker for my house trips out. It seems to happen consistently at this temperature. The printer still works well for printing lower temp materials like PLA, the issue …

Someone else posted about this a few months ago.

I have a similar issue with another model, but mine is tripping the gfci, but not the breaker. Try reaching out to @sovol3d . You can email them at Info@sovol3d.com

Does the breaker include a GFI circuit? I seem to recall that in some US jurisdictions codes now require “anti-arc” breakers in circuits supplying power to bedrooms. Does the printer come close to the breakers capacity? Are you comfortable swapping the location of 2 breakers in your breaker box? …

I’m not an expert on how all the different kinds of circuit breakers but to my knowledge the main breakers here in Australia all work about the same way as GFCI ones do. So they will trip for over current but will also trip if the current going into the live wire isn’t the same as the current coming…

Do you have a link? I search the forum before posting this but couldn’t find anything that matched my issue.

[image] PLASMINFORGE: breakers here in Australia all work about the same way as GFCI ones do if that’s the case I put my money on insulation breakdown in the bed module due to thermal expansion. could be anywhere on the side of the heater glued to the underside of the plate and almost impossi…

It was @jbob about the GFI’s [image] Tripping GFCI Sovol SV06 Plus ACE Just unboxed and put together the SV06 Plus Ace. During its calibration phase, it’s tripped two separate gfci circuits. The first circuit had a light load on it, but nothing drastic. The second circu…

Sv08 trips power when bed temp hits 97-98 degrees C

Sovol SV08

Lion June 8, 2025, 3:07am 8

It was @jbob about the GFI’s

Topic		Replies	Views
SV08 MAX Bed Heater overtemp Sovol SV08 MAX heat-fails	2	40	April 2, 2026
Power connector overfused Sovol SV08 MAX	12	473	November 23, 2025
Sovol SV04 Hot Bed Thermal Runaway Error Sovol SV04 IDEX advice , heat-fails	13	620	January 27, 2025
Tripping GFCI Sovol SV06 Plus ACE	22	412	May 3, 2025
Bed heats as soon as power on Sovol SV04 IDEX heat-fails	2	43	November 2, 2024

Sv08 trips power when bed temp hits 97-98 degrees C

Related topics