Have printed flawlessly for about 100 hours on my SV08. Using default software, obico slicer, web interface on mainsail. The printer seems to just pause randomly. Sometimes, it unloads the filament (so I thought the filament sensor was bad, but it seems OK). Sometimes it just pauses. In all cas…

Hello, I suggest you open a ticket on info@sovol3d.com Give them your order number and your pictures

Hey Mistral - interesting thought. You wouldn’t happen to know how do disable obico (I’m assuming a typo - not familiar with ubico), would you? Thanks!

[image] Filament wrapping around the nozzle Sovol SV08 Obico only looks for spaghetti & will send a notification if it detects it. From the notification, you can tell them if it was real or false. The setting for this is in the main screen under the info & ca…

Just a follow up. This problem turned out to be noise from the print head. A ferrite bead on this cable solved the problem and now it prints as before. Not sure what changed from the initial prints to cause the problem.

SV08 pauses print randomly

Sovol SV08

Lion December 30, 2024, 12:08pm 5

Topic		Replies	Views
Filament wrapping around the nozzle Sovol SV08 advice , filament	13	372	December 31, 2024
Printer shows always "paused print" Sovol Klipperized SV07	12	356	October 4, 2023
Sovol SV06 Plus just stopping during print Sovol SV06 Fully Open Source 3D Printer	2	474	April 2, 2024
SV08 Stops Extruding Mid-Print Sovol SV08	20	1137	September 17, 2025
On going problems with the SV08 printers Sovol SV08 heat-fails	9	1511	August 11, 2025

SV08 pauses print randomly

Related topics