New Polymaker PETG Profile

Sovol SV08
1

If anybody comes up with a really good SV08 profile for the new Polymaker PETG please share. I just received some spools so I plan on working through calibrating a profile for it soon, but I’m always curious how others are handling their settings like cooling etc.

It always feels like there are two types of people, one tries to calibrate and enable every possible setting available and the other tends to only calibrate the bare minimum like temp and flow..

Personally I am somewhere in the middle but lean more towards less changes..

Unfortunately Polymaker only provides a Bambu Studio profile. I used this to get a baseline to start my profile with by copying many of the settings into Orca. Hopefully this is a decent place to start.

2

I’ve used the profile for ASA on my Zero.
If I remember right, I only changed 2 settings.

I’m in Mint at the moment & can’t look, I’ll boot into Windows later & post the changes if you like.

3

Polymaker just released a whole new high speed petg formula with amazing layer adhesion.

They of course recommend settings but it seems to be based on Bambu printers. I’ll start calibrating tomorrow and see how it goes.

1 Like