Hi everyone, had my ACE for a while now, on the whole I use PLA (Jato matte), all calibration dialed in (or so I thought!) and put fuzzy on (0.1/0.1). Nozzle is a TriangleLabs NCB 0.4mm. I use Ocraslicer Last night, I thought I’d print off the Ocraslicer cube, see how it turns out, and can see a fa…

I’ve had Banding on my ACE since the beginning, never found a fix. [image] ACE Klipper Question (Banding) Sovol SV06 ACE I’ve been printing these on my A1 Mini without any issues. I need about 20 more, so I printed 2 of them on the ACE. Two different filaments…

I’m finding .20 height with fuzzy is the only real solution at the moment, but can’t really use that on huge prints! I’ve watched all the videos on your previous post, and am planning on looking at the extruder gear, I’ve been messing around with the tension arm, and had a little success with that, …

An update @Lion ,the fan in the processor cage thing died (3/4 way through a print, as expected..) swapped for a Noctua NF-A4x10 FLX. Took my extruder apart, lots of old filament pieces in there, cleaned all that out, re-greased. looks great. Checked gears, all level. Re-calibrated belts through num…

[image] UKUser: Spent several hours going through the test model, modifying flows, layer time, cooling, heights and so on. Gone through one spool of pla for tests. Not a &#*@% difference in layer height quality!! Frustrating isn’t it. There is a lot in my post above that wasn’t posted becau…

I’m glad you mentioned the Oldham Couplings, that was my next route! I watched every video you previous posted, there’s some really great content, this has to be a mechanical issue somewhere? I’ve messed with the Z offset mid-print each step down to -0.05 and up +0.05 every 20 layers to see what hap…

The band appears every 3 mm, the space between the Z-rods is 1.5mm…so 1 full rotation would equal 3mm. I got stuck on that for awhile, but I did everything I could think of. Also, this was my first Klipper printer, so I still don’t know for sure if it’s a Klipper issue or a Orca Profile issue. I d…

Well this evening I’ve stripped the two screw bars, cleaned and checked they are both clean and level (back of frame to bar is 50.4mm), using some decent digital calipers, they’re all aligned now (I was out by 2mm) Did that make any difference? A little… My test is a 30mm cube, no infill, 0.2mm, …

Depending on the filament color, it can be hard to see…but you should be able to feel it.

Some good news, those little black things that fit on the z axis on each screw? I’ve loosened them completely so there is a fair bit of play, the prints have improved

@lion I’ve ordered WobbleX, with both coupler types (ali order, was buying bits and bobs anyway), in the meantime I’ve been playing with some settings, and have managed to get quite a bit of banding removed (or significantly minimised) on the 0.12 height. Going to carry on fiddling over the next few…

Banding issues

Sovol SV06 ACE

Lion November 24, 2025, 2:24pm 2

I’ve had Banding on my ACE since the beginning, never found a fix.

Topic		Replies	Views
ACE Klipper Question (Banding) Sovol SV06 ACE	21	639	January 16, 2025
Print issue or Filament issue? Not sure Sovol SV06 ACE	12	153	July 4, 2025
Unable to print anything with a new SV06 ACE Sovol SV06 ACE	42	457	July 23, 2025
Loose Extractor assym? Need some advice! Sovol SV06 ACE	38	233	July 22, 2025
SV06 ugly layer lines Sovol SV06 Fully Open Source 3D Printer	23	4676	May 17, 2023

Banding issues

Related topics