Hi everybody, this my very first post in the forum. It is also my very first time with my brand new SV08 max, and by extension my very first time with OrcaSlicer. I come from the world of Prusa, which is very different. I built the printer, no issue with the hardware, didn’t power up yet, I am st…

Welcome to Sovol. You’re going to notice a lot less hand holding than Prusa provides. I don’t have a Max so the below is a “guess”. proceed with caution. NOTE: Prusa slicer is first cousin to Orca (both decend from SuperSlicer). It should be possible to integrate the Max into that work flow if you …

Sovol only releases 20mm 0.4 profile…sooner or later Orca or other users will release more profiles.

On Sovol’s Orca fork at github there are folders for .4 .6 and .8 nozzles. I have no idea if they actually populate when the installer runs.

I guess ignorance CAN be a blessing, lol. I was unaware that there was any way to get profiles, other than creating them myself. I just started with generic ASA and tuned it till I got a good print. Save the changes by renaming the profile. The only problem I’ve had was with overheating the host, wh…

SV08 max OrcaSlicer profile

Sovol SV08 MAX

Lion April 29, 2026, 9:16am 6

Topic		Replies	Views
Printer cannot be selected in Orcaslicer after adding profiles from Sovol GitHub Slicer Questions slicer	5	473	May 31, 2025
Zero Orca Slicer Overwrite Sovol Zero	10	632	November 21, 2025
Orca Slicer Profiles Slicer Questions	44	4541	January 15, 2026
OrcaSlicer profiles Sovol Zero	5	1445	August 5, 2025
Cura profile for Sovol Zero Sovol Zero	11	441	July 11, 2025

SV08 max OrcaSlicer profile

Related topics