Hello, normally i’m using my SV06 ACE with Orca Slice which works nearly perfect. But for printing RC Plane Models the Cura Surface Mode is needed to print this planes. Has anybody integrated the SV06 ACE into Cura slicer? There are some Sovol printer in Cura but not the SV06 ACE. Best regards K…

[image] KlausP: Cura Surface Mode In Orca: Set parameters to 1 Set infill to 0% set top layers to 0 set bottom layers to 0 DIY surface mode Also Check this out Instructions for printing RC model with foaming PLA (PLA Aero)

Hi Cardoc, thanks for your answer. I’ve checked this but it didn’t work. i’ve printed various RC planes with thin or single wall profiles. The difference with the Cura surface mode ist, that in the printing files have inner structures which have to be printed and this didn’t work with Orca. I’ve tr…

I asked Sovol when I got my Ace if I could use the SV07 profile, they said no..it would not work. They told me that it was built for Orca & all future printers will also. You didn’t post if you had another printer or not. The only thing I can suggest that might work, is try to copy the Cura setti…

Hi Cardoc, with your Cura Version an the selection of the klipperized SV06 its printing perfect. Many thanks for this. Due to the fact that i am normally using Mac instead of Windows (i am using only a virtualized Windows) i will try to export the Klipperized SV06 Profile from your Cura into my M…

I’m glad my guess worked out for you. I haven’t used Cura in a LONG time so I’m not much help on moving profiles. Perhaps this link has some help SV06 Cura Profile (for reference) - Google Drive Another thought, some years ago I helped an 8th grade teacher se…

Same here, looking on Sovol SV06 ACE profile for latest Cura. I was able to find only blog post regarding SV06, but as it is Marlin and not Klipper based, I doubt procedure is the same: [image] How to add Sovol SV06 to the original Cura *This method is available on the version of Cura V5…

If you don’t need the “surface” mode I’d strongly recommend you learn to use Orca. Clinging to Cura is going to complicate your use of the Ace forever. If you require the “surface” mode to print light weight models then [image] SV06 ACE with Cura Slicer Sovol SV06 ACE Wh…

Klipper only supports some of the gCode commands supported by Marlin. Depending on the manufacturer, some gCode commands are embedded as macros. As a result, there is no uniform gCode command set for Klipper printers. Cura supports a large number of commands that Klipper printers do not understand. …

SV06 ACE with Cura Slicer

Sovol SV06 ACE

cardoc July 2, 2025, 4:21pm 5

What version of Cura are you using? I’d use Sovol3D Cura_1.7.2_x64 and tell it I had a Klipperized SV06. Edit the plate size and go.

Topic		Replies	Views
OrcaSliser and SovolSV06 KlipperScreen Sovol SV06 Fully Open Source 3D Printer klipper	3	297	March 8, 2025
Which other slicer? Sovol SV06 ACE advice , slicer	3	388	November 29, 2024
Any slicer with simple selection for SV06 PLUS? Sovol SV06 Plus slicer	8	806	September 6, 2024
Cura profile for Sovol Zero Sovol Zero	11	441	July 11, 2025
Cura Versions Sovol SV06 Plus slicer	2	278	June 1, 2024

SV06 ACE with Cura Slicer

Related topics