When will there be native Eddy or Beacon Probe support without switching to mainline klipper?

Here it is all installed and working. [Sovol Eddy Sensor kit installed and working.] So far so good with the kit. Huge improvement to my bed mesh and I think overall print quality. Still waiting for th first test print to finish but it looks good so far.

Great improvement! Two things bug me though. One: when you start a print, it does a zero-offset and bed mesh with a cold bed. Should be at printing temperature. Got around by manually setting the bed temperature before starting a print. Two, which is a bit more serious: after starting a print , it…

Yes, i have the same problem that the nozzle scrapes the buildplate on the way to the nozzle cleaner.

Right, so it’s not only me. That would mean that the macro is not quite right. I’ll contact Sovol customer support. Thanks for the quick reply.

I don’t have the issue. It is extremely close.. at least the left corner of the tool head cover is.. but it never hits anything. I was used to preheating the bed so for me it is all just welcome improvements. It is significantly better than it was previously in many ways.. superior bed mesh, super…

Hi, the solution is to change the orca start gcode to the newest one: G28 M140 S[bed_temperature_initial_layer_single] ;set bed temp M190 S[bed_temperature_initial_layer_single] ;wait for bed temp START_PRINT G90 G1 X0 Y0 F12000 G1 Z0.300 F600 M104 S[nozzle_temperature_initial_layer] ;set ex…

Thanks, that indeed solved the temperature issue.

Got my Eddy kit installed every thing went well, the only thing is that it drops the Wifi connection during printing an will not reconnect unless I turn it off and restart it did not have a issue before? I sent a e-mail to Sovol hopefully they will have a fix for this.

It happened to me once right after install but only once so far. It has been stable since.i just completed a large print almost two days long and it was solid all the way through.

As it turns out the WIFI didn’t drop it would connect to my WiFi but then it would revert back to IP127.0.0.1 the factory WiFi setting. I got it working, seems since it was still on V2.3.3 and it worked flawlessly my thought is if it’s not broke don’t fix it, so never updated it. Anyhow I took it …

Eddy and Beacon SV08

Sovol SV08

cardoc October 29, 2025, 12:50am 44

I made a new topic under Firmware to discuss the way Sovol implements eddy current sensors.

Topic		Replies	Views
SV08 updated toolhead and bed...when? Sovol SV08	29	1204	November 5, 2025
Will there be BTT Eddy Probe support in the future? Sovol SV08 leveling-issue , firmware , bed-leveling , klipper	69	2705	May 7, 2025
SV08 BIGTREETECH EDDY Duo Eddy Coil Sovol SV08	32	5116	November 11, 2025
Eddy for SV08 without mainline hassle Sovol SV08 challenging	54	3249	July 27, 2025
My SV08 Sovol SV08	14	1299	February 9, 2026

Eddy and Beacon SV08

Related topics