Does anyone have a Cura profile for Sovol Zero?

Sovol moved from Cura to Orca starting with the SV08. The only way to get a Cura profile is for a user to create & share one.

My recommendation is to forget Cura and learn Orca. Once you get the hang of it, you’ll see improved prints. The built-in flow rate and pressure advance calibration routines alone are worth the effort.

There is a known bug in OrcaSlicer for some Linux users with some Nvidia graphics cards, where the popup list of printers is blank so it isn’t possible to import the Zero printer profile into OrcaSlicer. I hope the Zero profile for OrcaSlicer is on the USB thumb drive that ships with the Zero, beca…

[image] Liberty4Ever: I hope the Zero profile for OrcaSlicer is on the USB thumb drive that ships with the Zero, because I haven’t been able to find it online. It will be on the USB.

Thank you. I’d checked there before without any luck. I was planning to check again when I received my Zero. It looks like Sovol added most of those files on 10APR25, the day the US Zero shipments were scheduled to start. There is an OrcaSlicer config for the Mac and Windows versions of OrcaSlic…

Thanks. That’s disappointing because I have a number of Sovol 7s on Cura and wanted the kids to use the same slicer for the Zero, which would have been cool for them. Orca seems a bit too steep for just this one printer.

You can move the SV07’s to Orca.. But I do understand, coming from Cura myself..it is a little hard to get used to. Running Cura, Bambu Studio & Orca at the moment.

[image] Martin: someone compiled a version and put a link You can get the official nightly builds also for Linux from Releases · SoftFever/OrcaSlicer · GitHub (click the “Assets” link to show the files) that contain the Sovol Zero profiles until v2.3.1 has been released. No need to use packag…

Cura profile for Sovol Zero

Sovol Zero

cardoc April 16, 2025, 9:20pm 8

No need to wait for screen shots, the .jason files are easy to decode.

Topic		Replies	Views
Zero Orca Slicer Overwrite Sovol Zero	10	647	November 21, 2025
Orca Slicer Profiles Slicer Questions	44	4945	January 15, 2026
OrcaSlicer profiles Sovol Zero	5	1553	August 5, 2025
Problem: Lack of Sovol printer profiles in both Cura & PrusaSlicer Sovol SV05 Cubic DD firmware , advice	6	5774	October 7, 2024
Confused about cura profiles Sovol SV06 Plus	13	3907	April 18, 2023

Cura profile for Sovol Zero

Related topics