Ambassador Application MakerLew: Make Mistakes

:hammer_and_wrench: 1. About You


:printer: 2. Your Sovol Machine(s)

  • Which Sovol model(s) do you own?
    • I ordered an M1D Advanced
  • How long have you been printing with it?
    • Haven’t yet

:rocket: 3. Your Featured Mod / Project

  • Project Name: Chamber Heater Install
  • What did you build or modify? My current printer is a P2S. I installed an Ali Express heater and it was the jankest mod I have ever done. I ordered the new revision of the Panda Breath and to install it I needed to redesign the seating bracket and find an asthetically pleasing way to install run the power cable. The provided solutions required too many concessions, such as reprinting my riser, losing Z axis hight by running the wire through the bottom, or unsightly cable management through the interior so I hid the cable under the machine.
  • Photos & Videos: https://makerworld.com/en/models/3445777-panda-breath-p2s-v1-1-2026?from=search#profileId-3929967


:light_bulb: 4. Your Maker Story & Open-Source Spirit

  • Tell us briefly about your 3D printing journey. What does open-source and community co-creation mean to you?
    • I have wanted a 3d printer for the past decade, but could never afford one. This year I was given a sizable bonus at work and put down the money to buy my first printer. A Bambu Labs P2S. It is a great printer, but it is lacking in a few areas. No heated chamber, too small of a bed size, and a single nozzle. Since then I have been buying every mod I can for it. Nozzles, heaters, build plates, the exhaust fan, and every type of filament I can get my hands on.

    • Along the way I have noticed some of the practices Bambu uses have ruined the fun I am having with my printer. Things like locking down the slicer. There was a brief time during the summer where Bambu was blocking temp towers and speed tests from being loaded into their slicers by deleting custom g-code when you open a file. This was upsetting because even though I use thier filament I enjoyed the time spent creating a custom profile to print a little faster or a little smoother. When I complained they blew me off, ignored my concern, from that day I decided my next printer would be open source. I even sent them an email letting them know the money I was saving for a H2C was being spent on your M1D. They lost a fan, and Sovol gained one. They have since restored the ability to open custom g-code in their slicer, which is great, but it is already too late. I am excited by the idea of having a multi head, multi nozzle big format open source printer that will let me tinker to my hearts content.
      In fact I have been planning to start a my own Youtube channel to document my adventures with the M1D. I have been active in the maker space, researching how to produce videos for youtube, learning how to 3d model in Blender and Freecad and slowly buying the equipment I need to produce quality content. This competition is pushing my timeline up a bit. I wasn’t planning to launch until after my M1D arrived but it looks like I will need some content to prove I should be your ambassador. I guess I will get to it then.

      PS. If you want to help me get started you could send me a SV08 Max to get started. Just a suggestion.

      Thanks for having me.

      MakerLew


3 Likes